ACRP IdeaHub Synthesis Topics

About 15% of American adults suffer some level of fear (aviophobia). While some of them avoid flying almost totally, there are 15% that are passengers* passing through a US airport and experiencing aviophobia from boarding their upcoming flight. This fear, exacerbated to some extent by various factors within the airport's control, impacts passenger experience, their behavior before, during, and after boarding their plane.... more »

Airports, especially general aviation, nonhub, and those with geographic terrain issues, have challenges with maintaining the turf and vegetation in and around the airport. The proposed Synthesis would review current airport practices for turf and vegetation management given the various constraints of manpower, equipment, funding, etc.

Compilation of case studies and lab research door concrete that reaches 30,000 psi compressive, 4,000 psi flexural strength. Allow Airport industry to benefit from lessons learned in highway applications. Look at rapid placement, plastic failure mode instead of rigid, lower cost, thinner overall pavement section due to ability to spread loads to a wider subgrade area, possible reduced labor and equipment cost and potential... more »

To receive the full potential of perimeter fencing, the fence needs to be extended underground. Wildlife can push the bottom of a chain link fence up or dig under to enter onto properties and cause delays or damage. Animal barriers that can interlock with chain link fencing to extend and secure the fence have proven to be very effective. Dig Defence, LLC has a proprietary solution for these issues.

Create, collect, and analyze data from an Airfield Electrical Infrastructure Survey that documents product types, installation methods and maintenance methods of airfield electrical equipment.

https://www.surveymonkey.com/r/K6X5FCB

This synthesis would analyze the current state, feasibility, and interest of airports and the FAA to use recycled concrete aggregates as constituents in a concrete mix design of new airfield rigid concrete pavements.

Building Information Modeling is mainly used for design & construction phase of an airport project. Ultimately, if stated in the project contract requirements, as-constructed model data is transitioned to Asset Management platform used by Airport Facilities Management team. Hence, the intent of BIM is to represent a physical space digitally for construction purpose and not to address daily occupancy and utilization of... more »

Runways routinely require the removal of rubber to maintain adequate surface friction. According to FAA AC 150/5320-12C, rubber can be removed by High-Pressure Water, Chemical, High-Velocity Impact, and Mechanical removal. Survey experiences with various airports in different climates to assess the cost, time required, benefits, and tradeoffs with various methods of rubber removal.

The objective of this research is to create a database of performance benchmarks for airport facilities. Airport staff need a better understanding of key operational metrics associated with building performance in order to improve efficiency, decrease operating costs, and reduce environmental impacts. A standard system which normalizes for weather, location, carbon intensity of utility supplied energy, and airport specific... more »